linksys 48 port SLM248G switch problem

[Mrwhiteboard]

I currently have a 48 port SLM248G linksys switch on a business network. Everything runs fine on the network EXCEPT a dell webserver (static IP) running linux. There appears to be a 4-5 second time lag when connecting via a browser. I know the switch is the issue because when I replace it with an unmanaged switch it works fine. I have also tried different settings on the switch and nothing..Any ideas here and does anybody have any suggestions. Marc

 

[BeerMePlz]

Have you checked to see if there's a mismatch in speed/duplex settings? Have you tested the cable you are using or tried a different one?

Do you see this problem when using the Web server on another switch? You could always try changing its NIC.

Hope this helps..

Evan
(CCNA, CCDA, CCNP [expired])

 

[burtsbees]

Can you ping to google and see what sort of times you get? Can you post a config of the switch?

BTW, this is a Cisco switch forum...

/

tim@tim-laptop ~ $ sudo apt-get install windows
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package windows...Thank Goodness!

 

[vipergg]

Makes sure the ports on the switch are not hardcoded to a specific speed and duplex , leave them at auto .

 

[burtsbees]

Oh, and this is a Cisco switch forum...

/

tim@tim-laptop ~ $ sudo apt-get install windows
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package windows...Thank Goodness!