Link to another switch

[monacom]

Can anyone explain how I would set the ip office up to link to another switch through an analogue line. It was set up before but to an index which we replaced with the IP Office.
I have been presented the analogue line from the other kit, so I would imagine I need to be the trunk end.
All help and tips appreciated.

 

[IPGuru]

what type of connection did you provide with the index?
if it was a trunk then you will need an analoge trunk module
(either 4 port internal or 16 port external)
set the OG line group & program a short code to alow access

If you were connected Via an AC15 circuit i belive you will be out of luck