Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Link is out of service or link access is not given

Status
Not open for further replies.

koulioumbis

IS-IT--Management
May 21, 2009
421
GR
Hello Team.
Many Wishes for the holidays.
I face a strange issue when I try to forward bcm digital sets to a route.
the error I get is "Link is out of service or link access is not given" although route is in place
and the set is allow redirect enabled.
I also noticed that when trying to forward another set to the same destination it forwards without issue.
So I have set 320 ( T7316E) and trying to forward to 520 ( external route over SIP trunk), when trying to forward I get the error.
Doing the same forward from set 223 it allows me to complete the forward.
any ideas?

Thanks

Nikos
 
Team hi again.
Just found the solution...
need to give access the set to VoIP trunk..
Nikos

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top