Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Link / Flash/Recall Timer for BCM50 UK Profile

Status
Not open for further replies.

koulioumbis

IS-IT--Management
May 21, 2009
421
GR
Hello Team Members.
Since BCM50 in UK profile has no option to select the Link/Flash/Recall timer what would it be a correct timer to set on an analog dect set in order to perform transfer and other features with the R *70 feature?

Thanks
Nikos
 
I believe that the "Timer" refers only to the analog Trunk features and not Station (ATA) features.
Look for Timed Break Recall under Set programming maybe if it's Internal feature you are trying to do (Transfer to a DN)

Process

External Transfer:
R plus the destination phone number

Internal Transfer:
R * 70 plus the destination DN





________________________________________
small-logo-sig.png


=----(((((((((()----=
Toronto, Canada

Add me to LinkedIN
 
Team got it working with a set that has dedicated R key.
the new analog dect sets in the market share the key with eco or other features so you have you play with time in order to achieve the correct timing on key press.
anyway it works fine on analog sets with dedicated R or flash key.

regards

Nikos
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top