Line-Side T1 Ring Question..

[penduko]

I was able to install a Line Side T1 through the help of many people in this forum. I am now experiencing the problem below with regards to the LST1:

I can now seize the channels and perform outgoing calls using them. However, when I tried to define from a software (IVR for Win2K with Dialogic) channels for incoming calls, the software cannot detect the channels ringing when I tried calling them although I can hear the channels ringing from the phone I'm using.

Thanks in advance

 

[PERRYPJ]

YOUR GOING TO NEED TO GET HOLD OF SOME TYPE OF T1 TESTER AND LOOK AT THE CHANNELS ON THE T1, YOU SHOULD BE ABLE TO SEE YOUR A-B BITS CHANGE WHEN YOU RING THAT EXTENSION.
I CAN ALMOST TELL YOU THAT THE PROBLEM WILL BE IN THE DIALOGIC PORTION, BUT TO PROOF IT YOU WILL NEED TO PUT SOMETHING ON THE LINE. OLD ROLMEN WORKING ON NORTELS

 

[jjmcc2]

I don't know about your Dialogic system, but some of our system require a ring generator.

 

[PERRYPJ]

THE DIALOGIC SYSTEM WOULD DEFINTLY NEED A RING GEN TO RING A PHONE OLD ROLMEN WORKING ON NORTELS

 

[penduko]

Thanks guys, I tried connecting the LST1 to a Channel Bank via FXO connection. I tried calling the DNs inside the LST1 and the phone connected to the Channel bank rang.