Line Preference outgoing -> auto-select Idle line for analog phones 1

[mannim]

Hello,

on a PBX KX-TDE100/200 system it is possible to activate the auto-selection of a free idle line (trunk) without the need of pressing the "0" key.
For analog phones / extensions, this option is greyed out (on SLC8, DHLC8 a/b) ...

Is there a way / workaround to automatically select a free idle line on analog phones without the "0" key being required?
It is required for analog alarm gateways that have a phone number hard coded and the number "0" cannot be added at the beginning.

Thanks for your help.
manni


(Panasonic Feature Guide KX-TDE100/200/600; 1.5.5.2 Line Preference—Outgoing)

 

[Wanet Telecom Ltd]

set hotline to 0

 

[mannim]

Thank you, perfect working solution.