Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Line numbering

Status
Not open for further replies.
aburd

aburd

Vendor
Jun 11, 2003
10
0
0
US
I'm installing two pri's on 6.1 software. When programing the second one the line numbering was 31-54 is this correct? If so, what happen to 24 - 48.

Thanks
 
Sort by date Sort by votes
Yes it is correct, the lines are now 1-30 for the 1st PRI and 31-60 for the second. In normal T1 circuits you are going to be using 1-24 & 31-54 the other channels are used when connecting to an E1 circuit.
 
Upvote 0 Downvote
yes this is correct t1 in europe are 30 channels since these ksu are globle they need to support europes t1
 
Upvote 0 Downvote
The pri is a very tricky platform, have you ever done a centrex pri??

Tommygun
 
Upvote 0 Downvote
Gone with S/W Version 6.X

The secret of Joy in work is contained in one word- excellence- To know how to do something well is to enjoy it..
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Mike CVT
  • Locked
  • Question
What does DRT Line031 or Line032 mean?
Replies
2
Views
93
Mike CVT
Mike CVT
ShowmenHeather
  • Locked
  • Question
Programming ring tones by line
Replies
6
Views
96
curlycord
curlycord
chay1
  • Locked
  • Question
Nortel CICS Line card
Replies
9
Views
103
chay1
chay1
r3tech
  • Locked
  • Question
Noretel-Plus Compact ICS Line Busy
Replies
5
Views
80
curlycord
curlycord
wirednet
  • Locked
  • Question
Norstar MICS date changing when the incoming CO line rings
Replies
4
Views
74
curlycord
curlycord

Part and Inventory Search

Sponsor

Back
Top