Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
line colors?
- Thread starter mx70kc
- Start date
Hi,
You set your color on the tool palette then draw your line or box.
You might be in greyscale mode too, goto IMAGE > MODE and make sure you are not in greyscale, or you might be only working in one channel, WINDOW > CHANNELS make sure that the all layers there are visible.
Hope this helps!
You set your color on the tool palette then draw your line or box.
You might be in greyscale mode too, goto IMAGE > MODE and make sure you are not in greyscale, or you might be only working in one channel, WINDOW > CHANNELS make sure that the all layers there are visible.
Hope this helps!
- Status
Similar threads
