LINE BUTTON PREFERENCE ON MLX PHONES

[SYQUEST]

It seems every time I make program changes to line buttons on MLX phones, either as features or SA Ring/Voice, the preference changes to SA Voice when you go off-hook! I have read the MLX user guide and looked in various manuals, but can't find any explanation of how to set or change this option. Am I overlooking something obvious? All my program changes were done thru SPM. This Legend has R6.0 software. Any help is appreciated!

Thanks!
...JIM...

 

[ken07734]

*14 select order of lines then **14 to end

 

[SYQUEST]

Hi ken07734,
Thanks for your quick response! I was just going to logout when I saw a post. I will try the *14/**14 code on Friday. Now this can only be done at the MLX phone? Or can it be done in programming? So at the phone I press *14 then the line buttons in sequence, SA Ring, SA Voice, SA Orig, then **14 and that should do it?

....JIM....

 

[ken07734]

at the MLX phone where it should be done because centralized is a pain with this, dial feat 0 0 then hit a button and dial *14, enter the lines in the order you want and hit **14 then home.

 

[jlshelton]

WinSPM also allows you to set the line pickup order remotely.

 

[SYQUEST]

Thanks for your help. I was able to put the lines back to their former state and the user is very happy now.

....JIM....

 

[ken07734]

WinSPM will ot let you do this if you are trying to go to page 2 of greater than 10 button set. obce you go to the second page it forgets what you tried to set. and it's very confusing.

 

[SYQUEST]

It looks like the DOS SPM 6.25 does something similar. That explains why I could not get it to make the change. I was going in circles!
......JIM......