Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Line access Questions

Status
Not open for further replies.

classic766

IS-IT--Management
Dec 29, 2005
19
US
Here is the Scenario:
ACS 7 in Key Mode
308 Module
6 Lines

I have set up the Lines to ring in two sets
2 Extentions To Ring On All Lines
2 Extentionson first 3 Lines
and
2 Extentions on second 3 Lines ( no access to first 3 Lines)
However i was under asumptions that the two phones on the Second 3 Lines will shift from button 4,5,6 to first 3 buttons on a Phone left most 1,2,3 but they did not
Everything is working including Line access but is there any way That i can Move those last 3 Lines to leftmost buttons 1,2,3 or what should i do.

 
Use Line Assign to remove the 1st 3 lines, then reassign the 2nd 3 lines where you want them to be, then use Copy to copy the settings to the other extensions that should be set up the same way.

#301-XX-NN-(1/2/3)

XX=Extension Number
NN=Line Number
1=Assigned to the NEXT AVAILABLE BUTTON
2=Not Assigned
3=Assigned to the BUTTON THAT YOU CHOOSE

#399-X1-X2

X1=Model Extension
X2=Target Extension

 
Thanks .
Sometimes the easy thing is the hardest.
I'm Dumb.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top