Limit over Error E036102

[ulforv]

Hi. system TDE-200 i´m trying to add a card in the system SLC16, i have 7 cards o this from before and the are up and running with green led. the new card are not comming up, for some reasen. I have tried to just ad the card and also added the card in the tool but get an error message. E036102, limit number over.

need some good idees.

Regards UO

 

[obtsystems]

Over limit would be over the amount of extensions you can have on the system.
How many extension ports do you have already

 

[ulforv]

the cards that are installed are 7 SLC16 cards, reading documentation thats says the 8 is maximum of the SLC16 cards,

 

[obtsystems]

Do you have any ip extension cards installed in the virtual shelf even if not in use

 

[94astro]

What size power supply and what other cards are in the TDE? The system capacity section of the install manual will have your answer.

 

[ulforv]

Hi.

as it is setup right now
7 SLC16
v-IPEXT32
V-SIPGW16

and would like to ad one other SLC16

can this not be done??

 

[obtsystems]

No 128 extensions is the limit. Since you have an ip extension card it will not allow you to install the extra 16 slc or dlc card