LIM processor memory error

[Gosy]

Help! I am getting error codes 91 and 110 on a LIM, Code 91 has an INF1 of 1 and INF2 of 92. Code 111 INF1=1 INF2=4. On following the fault flow charts it suggests following flow chart for code 110. The flow chart suggests read out the info using HIMDP and replacing the faulty physical memory part. I get pages of info with HIMDP command and it all points to:-

Logical Program Error Address=08802166
Logical Error Address=018B67EF
Physical Error Address=07D693EF

Where does this memory address relate to, do you have to down the LIM to replace the memory?

Thanks in advance

Mark.

 

[whosrdaddy]

Hi,

to replace memory you have to take LPU out of lim so the LIM will indeed go down.

--------------------------------------
What You See Is What You Get

 

[Gosy]

Thanks for that. Any idea what the difference is between LPU 4 &5's?

 

[whosrdaddy]

big difference,
lpu5 is used from BC8 and ram can be replaced. lpu4 is for BC6&BC7 and depending on the version they have ram onboard. those without memory must use MEU boards.

cheers

--------------------------------------
What You See Is What You Get