LIM on 5330

[UKMitel]

Hello all,

Having an issue with a LIM, I've never installed one before so don't really know much about them. Basically have a customer (who I'm dealing with remotely)who has installed a LIM on a 5330 set, boots the phone & gets the menu where he can configure the LIM, enters 6 for country code (UK), then selects LIM mode (as opposed to fail-over only) as he wants to be able to use the analog line, the next menu I would expect is to configure a key so he is able to select the analog line however it skips this & the next menu is the privacy menu & then it asks if you want to save settings.
A LIM has been programmed on the 3300 (8.0UR3) in the auxillary module of the 5330, anyone have any ideas on whats going wronfg?

 

[Mitelmatt]

You need to program a Key assignment with the line type as "Analog Line

 

[kwbMitel]

Yes,

You only get the line key config on the first power up.

You need to remove the LIM and power up without it, then re-install and you will get the line key Config.

*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.

 

[BillB66]

Dont forget that you can only select the analog line with the handset lifted.

When I installed mine , I was expecting the phone to go offhook ( in handsfree mode when I pressed the analog line button).