Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Lim 3 out

Status
Not open for further replies.

Omissam

Programmer
Jul 13, 2013
37
IT
Help me!!!!!! Lim 3 out MD110 BC9

DATE: 28SEPT15 TIME: 19:55:23
CLASS: 4
102 POWER FAILURE DETECTED BY DSU
DATE TIME ALP NOIF EQU INF1 INF2
28SEPT15 14:16:45 11 50 003-1-**-** 1 4

94 LIM RECOVERY FROM PLF MODE
DATE TIME ALP NOIF EQU INF1 INF2 INF3
28SEPT15 14:31:00 21 8 003-1-**-** 0 148 0

100 INTERNAL ERROR ON DSU BOARD
DATE TIME ALP NOIF EQU INF1 INF2
28SEPT15 15:50:27 28 1 003-1-**-** 1 259

33 INCREMENTATION ALARM FOR CLASS 3
DATE TIME ALP NOIF
28SEPT15 16:23:47 10 157



Thank you [piangere]



 
No contact with the DSU:

Run command LSFTI:LIM=3,DSU=1;
Check the voltages on the power unit to the magazine, the card is missing RGA ringing voltage.

Swap the DSU card
Block the board with LSBLI:LIM=3,DSU=1;// swap // unblock with LSBLE:LIM=3,DSU=1; // Test - Run command LSFTI:LIM=3,DSU=1;

Check the alarm has receipted.

best parnum
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top