Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

LIM 2 IS NOT LOADING

Status
Not open for further replies.

punh

Technical User
Feb 1, 2007
16
SA
WHEN IAM LOADING THE SYTEM WITH TSW SP04, LIM 1 IS LOADING WITHOUT ANY PROBLEM.

LIM2 IS NOT LOADING IT IS COMING UPTO 2700 ON LPU DISPLAY AND AGAIN IS IT GOING BACK TO 9064.

I CHANGED LPU,LSU AND DSU BUT STILL THE SAME PROBLEM.

PLEASE ASSIST ME.
 
Check your RG5DC (if it is old cabinet) or DCDC (if it is new subrack) and replace. Some voltage may be missing.
 
LPU Display shows 2700 meaning that there is a failed buffer transfer between sending & receiving side.

try to check/change the LPU, LSU & DSU boards or check the cable connection between them and try again.

you can check in alex about 27XX LPU display by typing 'lpu display' on the search field and its under 'fault tracing information'



 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top