Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

LIK-MFIM100 - Why can't I call internal SLT extensions?!? 1

Status
Not open for further replies.

devilguy

IS-IT--Management
Apr 13, 2012
3
I am new to the LIK series and I've pored over the manual and Google, but I still can't manage to dial local extensions (i.e. 111 from 120). The SLT room phones can dial 0 and reach atttendant phone and dial long distance. I hope you gurus can help me see the errors in my ways.

***Running - MFIM/VD95N-5.5Df JUN/11
***Numbering Plan 1
***Room phones are wired to SLTM32
***All stations are COS 1 (so are CO lines for now)
***When I dial internal extension ([Pickup phone and dial 111, for example) I get fast busy tone
***IP phones can call SLT room phones

Your help is greatly appreciated.

Nathan
 
Hi Nathan

Make sure you have checked in both of these rooms and also make sure that 'room to room enable' is activated for both rooms. Both of these features are activated off the main attendant.

Good luck

Eats
 
Eats,

Thanks very much. I can't wait to try this and report back.

Nathan
 
Eats,

Thanks very much for the guidance. Since this hotel doesn't use the check-in feature, I checked in all of the rooms. Then, I assigned them all to the 00 group and voila, all the SLT phones can dial one another.

Thanks again for the great advice. And restored sanity.

Nathan
 
Thanks for your update. I am always happy when feed backs and status messages are posted.

///doktor
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top