Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

LIK DTIM24 and STLM32

Status
Not open for further replies.

eats4treats

Technical User
Jul 10, 2011
228
GB
Hi

Does anyone have the depth of the DTIM24 and STLM32 with the lead attached on the back? I have a shelf within a cupboard that the current IPLDK100 installed and will be replaced with a UCP and above units. I only have a certain amount of space available.

Thanks

Eats


Ok, Press Trans *#..... TRANS/PGM..... the transfer key?.......sigh!
 
Hi,

Can't give you dtim measurements but sltm32 module is 320mm plus the depth of the cable and power plug so allowing for a right angled power cord I would allow 360-370mm. Can you mount them vertically? These type of brackets work vertically and I have used them to mount sltm's at 90 degress so the cables came out the side as well, You do need a 3 or 4U bracket as the dtim and sltm are not standard height.

C64
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top