Licenses Vs Configured Users - SMBC

[danramirez]

Hi Gents, In theory the SMBC controller is designed to host around 150 users. Could I add a total of 200 IP Users licenses and configure them all? Will the SMBC complain that I program more users that it is designed for? The traffic load will be very very load, no more that 10 simultaneous calls are expected.

Please advise.

daniel

 

[jpruder]

I would think you could do it without issues

 

[bojo3871]

This was from an MiVB presentation. I think the hotel capacity for up to 300 endpoints may be due to lower expected traffic.
MiVoice Business on SMBC can support:

• Integrated MPA probe
• Integrated MBG functionality for SIP Trunking, Teleworker and Mobility
• Integrated CloudLink Gateway for add-on apps and integrations
• 6 native FXS ports built-in with the option to expand up to 22 by adding 4-port cards
• 16 FXO trunks by adding 2-port or 4-port FXO cards
• Up to 150 users with 3 devices each (for SMB Market)
• Up to 300 end points for Hotels

 

[Billz66]

the problem will be with support , if you are overconfiguring it and there are any issues that appear to be resourse related , that will be mitels response - its been over configured - remove some devices . i currently have a micollab server in same situation - showing capacity alarms as it was deplyoyed as a 250 user and is now running 315.
its working fine but if i log a ticket then im expecting mitel to tell me to up the resources