Hello World, Is the first time I work with the ASA family, in this moment I have a Cisco ASA 5510 with the following Inventory and Version.
FIREWALL# sh ver
Cisco Adaptive Security Appliance Software Version 7.0(4)
Device Manager Version 5.0(4)
Compiled on Thu 13-Oct-05 21:43 by builders
System image file is "disk0:/asa704-k8.bin"
Config file at boot was "startup-config"
FIREWALL up 40 mins 7 secs
Hardware: ASA5510, 256 MB RAM, CPU Pentium 4 Celeron 1600 MHz
Internal ATA Compact Flash, 64MB
BIOS Flash AT49LW080: @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
Boot microcode : CNlite-MC-Boot-Cisco-1.2
SSL/IKE microcode: CNlite-MC-IPSEC-Admin-3.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.04
0: Ext: Ethernet0/0 : address is 0014.6a21.aeaa, irq 9
1: Ext: Ethernet0/1 : address is 0014.6a21.aeab, irq 9
2: Ext: Ethernet0/2 : address is 0014.6a21.aeac, irq 9
3: Ext: Not licensed : irq 9
4: Ext: Management0/0 : address is 0014.6a21.aeae, irq 11
5: Int: Not licensed : irq 11
6: Int: Not licensed : irq 5
Licensed features for this platform:
Maximum Physical Interfaces : 4
Maximum VLANs : 0
Inside Hosts : Unlimited
Failover : Disabled
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Security Contexts : 0
GTP/GPRS : Disabled
VPN Peers : 50
This platform has a Base license.
Serial Number: JMX0951K03B
Running Activation Key: 0x5534fd4d 0x0cf7fb11 0x2c61f0f0 0x98e414e4 0x0200f9b8
Configuration register is 0x1
Configuration has not been modified since last system restart.
FIREWALL# sh inventory
Name: "Chassis", DESCR: "ASA 5510 Adaptive Security Appliance"
PID: ASA5510 , VID: V01 , SN: JMX0951K03B
Name: "power supply", DESCR: "ASA/IPS 180W AC Power Supply"
PID: ASA-180W-PWR-AC , VID: V01 , SN: DTH09240CVK
FIREWALL#
My question is... This ASA 5510 can work with the ASA-CSC10-PLUS license?? What is the difference between Cisco ASA 5510 Anti-X bundle and Cisco ASA 5510 Bundle?? Is ha different chassis (Hardwared)??
Help Please..!!
FIREWALL# sh ver
Cisco Adaptive Security Appliance Software Version 7.0(4)
Device Manager Version 5.0(4)
Compiled on Thu 13-Oct-05 21:43 by builders
System image file is "disk0:/asa704-k8.bin"
Config file at boot was "startup-config"
FIREWALL up 40 mins 7 secs
Hardware: ASA5510, 256 MB RAM, CPU Pentium 4 Celeron 1600 MHz
Internal ATA Compact Flash, 64MB
BIOS Flash AT49LW080: @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
Boot microcode : CNlite-MC-Boot-Cisco-1.2
SSL/IKE microcode: CNlite-MC-IPSEC-Admin-3.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.04
0: Ext: Ethernet0/0 : address is 0014.6a21.aeaa, irq 9
1: Ext: Ethernet0/1 : address is 0014.6a21.aeab, irq 9
2: Ext: Ethernet0/2 : address is 0014.6a21.aeac, irq 9
3: Ext: Not licensed : irq 9
4: Ext: Management0/0 : address is 0014.6a21.aeae, irq 11
5: Int: Not licensed : irq 11
6: Int: Not licensed : irq 5
Licensed features for this platform:
Maximum Physical Interfaces : 4
Maximum VLANs : 0
Inside Hosts : Unlimited
Failover : Disabled
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Security Contexts : 0
GTP/GPRS : Disabled
VPN Peers : 50
This platform has a Base license.
Serial Number: JMX0951K03B
Running Activation Key: 0x5534fd4d 0x0cf7fb11 0x2c61f0f0 0x98e414e4 0x0200f9b8
Configuration register is 0x1
Configuration has not been modified since last system restart.
FIREWALL# sh inventory
Name: "Chassis", DESCR: "ASA 5510 Adaptive Security Appliance"
PID: ASA5510 , VID: V01 , SN: JMX0951K03B
Name: "power supply", DESCR: "ASA/IPS 180W AC Power Supply"
PID: ASA-180W-PWR-AC , VID: V01 , SN: DTH09240CVK
FIREWALL#
My question is... This ASA 5510 can work with the ASA-CSC10-PLUS license?? What is the difference between Cisco ASA 5510 Anti-X bundle and Cisco ASA 5510 Bundle?? Is ha different chassis (Hardwared)??
Help Please..!!