Licence Server question

[tatol75]

I have IPO 403 v2.0(16).
Can I have to install Feature Key Server on Win2000 Server system?
I did it exactly: I installed Feature Key Server (reboot PC). I wrote Server IP Address in Manager and licence string (CCC Agents, etc.). I rebooted IP Office but I have only "Invalid" text on my Manager till the end.

What is that problem?

 

[IPOJedi]

The problem is you have 2.0916) abag of s*@~t, totally unstable, either upgrade to 2.0(18) or back to 1.4(27)...hopwever if you have installed the LKS, is it showing on the task bar and is red? (if white with a cross then the service is not running)
On the manager program ensure that the correct IP adress is inserted on the manger program (you can always place the broadcast in there) to proove the PC try running the LKS on your laptop, as could be access rights? in essace just go over the basic (I know Im telling you to suck eggs) then try running on your laptop, bit of fault finding

 

[IPOJedi]

ooops should be 2.0(18),, slip of the dislexic keyboard

 

[tatol75]

Thanks IPOJedi!

I'm downloading v2.0(18)! I've one question yet: is Feature Key device dedicate to one IP Office?
I have two IP Office 403. I want to carry licences with one module to another location (first location will stay without licences) and I have above problem.
Maybe I haven't move Feature Key device to anather IPO 403 module. Do I think correctly?
(When I've downloaded v2.0(18), I'm going to try install Feature Key Server software at once).

 

[sizbut]

License (the 13 digit codes) are unique to the serial number of the license key.

In addition, once the Feature Key server software has provided license verification support to one IP Office, it won't do the same for another IP Office without being totally restarted.

On the 403 with no licences, make sure the Licence Server IP address in the configuration is set to 0.0.0.0. On the other system set the address to the IP address of the Feature Key Server PC.

And restart evrything.