Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Legend upgrade to Maxic
- Thread starter HELPATECH
- Start date
tdaugirdas
Technical User
If you have no modules installed - other than the processor - it will be in surrogate mode. If you have modules installed - then retry the upgrade. After the upgrade - the processor will perform a "Full Erase" or frigid start-up to factory specs and it will try to recognize all installed modules.
Hopefully you saved a backup to WinSPM - which you will need to "convert" to the Magix Release you upgraded to - and you will need to "restore" the programming from that "converted" file using WinSPM.
Tom Daugirdas,
President
STCG, Inc.
stcg.com
Hopefully you saved a backup to WinSPM - which you will need to "convert" to the Magix Release you upgraded to - and you will need to "restore" the programming from that "converted" file using WinSPM.
Tom Daugirdas,
President
STCG, Inc.
stcg.com
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question