Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Legend to 3com Tie trunk

Status
Not open for further replies.

rexb2u

Vendor
Mar 17, 2002
1
GB
Does anyone know how to connect a Legend to a 3COM and make them talk? The 3com NBX-100 is trying work behind the Legend. It currently only has 1-2 stations. We are using a T-1 card in both. The Legend I belive is Version 7. The best we've done so far has been able to get the 3com user to dial 9-xxx-xxxx which goes to dead air. I belive a 9-1-xxx-xxx-xxxx also goes to dead air. We can make normal dial 9-anything calls out of the Legend. My thought was tell the Legend this trunk group to the 3com is a tandem-tie, but I'm not sure the techs working on it tried that or if the Legend is capable. I know the 3com isn't that bright. We have no alarms on the Legend and the 3com shows a "nominal" status light. I am not working on this directly someone else in my organization is so I may not be delivering all the facts. Thanks for any suggestions.
Rex
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top