Legend R7 to S87 Avaya PBX

[samelbe]

We are trying to get the T1 PRI up between these two switches, but having a D channel problem at both ends. Any clues on how the S87 should be set up to talk with the Legend R7.
Sam

 

[CableMonkey]

The setup on the S87 should be the same the Definity. I would search the definity forum. Here is a related tread: thread690-825466

 

[ken1713]

the legend switch type should be set to LEGEND-NTWKand the Definity end should be set to PBX-NETWORK. Hope that helps

 

[samelbe]

We got it working and will post the entire setup we used after it passes all test on the specs. No one should have to go through thiis again.