Legend PRI Won't Translate DID

[Victory101]

I've been trying to do translations on this PRI for some time with no success. Calls go outbound fine, but incoming won't translate with the carrier sending 3 or 4 digits. It goes to the unassigned number extension every time. Carrier is set for AT&T Custom and I'm set for 5ESS. Since I can make outbound calls, I wouldn't think that would be the problem.

The DID string is 253-446-4490 to 4979

Any help would be appreciated.

A PRI INFORMATION



A Slot 9 Switch: 5ESS

A System: By line

A BchnlGrp #: Slot: TestTelNum: NtwkServ: Incoming Routing:
A 1 9 CallbyCall By Dial Plan

A Channel ID: 23 22 21 20 19 18 17 16 15 14
A 13 12 11 10 9 8 7 6 5 4
A 3 2 1

A Line PhoneNumber NumberToSend
A 821
A 822
A 823
A 824
A 825
A 826
A 827
A 828
A 829
A 830
A 831
A 832
A 833
A 834
A 835
A 836
A 837
A 838
A 839
A 840
A 841
A 842
A 843

A Network Selection Table

A Entry Number: 0 1 2 3
A Pattern to Match: 101**** 10***

A Special Service Table

A Entry Number: 0 1 2 3 4 5 6 7
A Pattern to Match: 011 010 01 00 0 1
A Operator: none OP OP OP/P OP none none none
A Type of Number: I I I N N N N N
A Digits to Delete: 3 3 2 2 1 1 0 0

A Call-By-Call Service Table

A Entry Number: 0 1 2 3 4
A Pattern 0: 0
A Pattern 1: 1
A PRI INFORMATION


A Pattern 2: 2
A Pattern 3: 3
A Pattern 4: 4
A Pattern 5: 5
A Pattern 6: 6
A Pattern 7: 7
A Pattern 8: 8
A Pattern 9: 9
A Call Type: BOTH BOTH BOTH BOTH BOTH
A NtwkServ: No Service
A DeleteDigits: 0 0 0 0 0

A Entry Number: 5 6 7 8 9

A NtwkServ:
A DeleteDigits: 0 0 0 0 0

A Dial Plan Routing Table

A Entry Number: 0 1 2 3
A NtwkServ: Any service
A Expected Digits: 4 0 0 0
A Pattern to Match:
A Digits to Delete: 0 0 0 0
A Digits to Add:

A Entry Number: 4 5 6 7
A NtwkServ:
A Expected Digits: 0 0 0 0
A Pattern to Match:
A Digits to Delete: 0 0 0 0
A Digits to Add:

A Entry Number: 8 9 10 11
A NtwkServ:
A Expected Digits: 0 0 0 0
A Pattern to Match:
A Digits to Delete: 0 0 0 0
A Digits to Add:

A Entry Number: 12 13 14 15
A NtwkServ:
A Expected Digits: 0 4 4 4
A Pattern to Match: 4942 4941 4940
A Digits to Delete: 0 2 4 4
A Digits to Add: 1 140 142
P3F1FIM Tone

 

[cvrbob]

is that the DIDs or digits from the number that are porting over to the PRI (253-446-4490 to 4979 ) because they do not match up with the number's your trying to match

 

[Victory101]

Whoops, bad typist. 253-446-4940 thru 4979. Sorry

 

[kwing112000]

I am pretty sure if the telco sends you 3 then you may have an issue because it will start with a 9. you will need to make sure you get all 4 digits. I may be wrong but that is what i think.

 

[merlinman]

No one has asked the BIG Question here, WHAT IS THE RANGE OF YOUR EXTENSIONS?

We need to know that prior to trying to figure out Dial Plan Routing.

That is what we are trying to massage.

 

[SYQUEST]

Victory101,

Please post a print of your DIAL PLAN so we can see what numbers your stations are assigned!

....JIM....

 

[Victory101]

Sorry again, range of extensions in 101 to about 165. As you can see in the routing Patterns, I've already tried to route 3 of the DID numbers with no success.

A SYSTEM DIAL PLAN



A DIAL PLAN FOR POOLS
A POOL # 1: 70
A POOL # 2: 890
A POOL # 3: 891
A POOL # 4: 892
A POOL # 5: 893
A POOL # 6: 894
A POOL # 7: 895
A POOL # 8: 896
A POOL # 9: 897
A POOL # 10: 898
A POOL # 11: 899

A DIAL PLAN FOR TELEPHONE PAGING ZONES
A TPZ # 1: 793
A TPZ # 2: 794
A TPZ # 3: 795
A TPZ # 4: 796
A TPZ # 5: 797
A TPZ # 6: 798
A TPZ # 7: 799

A DIAL PLAN FOR DIRECT GROUP CALLING GROUP
A DGCG # 1: 770
A DGCG # 2: 771
A DGCG # 3: 772
A DGCG # 4: 773
A DGCG # 5: 774
A DGCG # 6: 775
A DGCG # 7: 776
A DGCG # 8: 777
A DGCG # 9: 778
A DGCG # 10: 779
A DGCG # 11: 780
A DGCG # 12: 781
A DGCG # 13: 782
A DGCG # 14: 783
A DGCG # 15: 784
A DGCG # 16: 785
A DGCG # 17: 786
A DGCG # 18: 787
A DGCG # 19: 788
A DGCG # 20: 789
A DGCG # 21: 790
A DGCG # 22: 791
A DGCG # 23: 7920
A DGCG # 24: 7921
A DGCG # 25: 7922
A DGCG # 26: 7923
A DGCG # 27: 7924
A DGCG # 28: 7925
A DGCG # 29: 7926
A DGCG # 30: 7927
A DGCG # 31: 7928
A DGCG # 32: 7929
A SYSTEM DIAL PLAN


A DIAL PLAN FOR LINES/TRUNKS

A LINE # 1: 801 OUTSIDE LINE # 2: 802 OUTSIDE
A LINE # 3: 803 OUTSIDE LINE # 4: 804 OUTSIDE
A LINE # 5: 805 OUTSIDE LINE # 6: 806 OUTSIDE
A LINE # 7: 807 OUTSIDE LINE # 8: 808 OUTSIDE
A LINE # 9: 809 OUTSIDE LINE # 10: 810 OUTSIDE
A LINE # 11: 811 OUTSIDE LINE # 12: 812 OUTSIDE
A LINE # 13: 813 OUTSIDE LINE # 14: 814 OUTSIDE
A LINE # 15: 815 OUTSIDE LINE # 16: 816 OUTSIDE
A LINE # 17: 817 OUTSIDE LINE # 18: 818 OUTSIDE
A LINE # 19: 819 OUTSIDE LINE # 20: 820 OUTSIDE
A LINE # 21: 821 OUTSIDE LINE # 22: 822 OUTSIDE
A LINE # 23: 823 OUTSIDE LINE # 24: 824 OUTSIDE
A LINE # 25: 825 OUTSIDE LINE # 26: 826 OUTSIDE
A LINE # 27: 827 OUTSIDE LINE # 28: 828 OUTSIDE
A LINE # 29: 829 OUTSIDE LINE # 30: 830 OUTSIDE
A LINE # 31: 831 OUTSIDE LINE # 32: 832 OUTSIDE
A LINE # 33: 833 OUTSIDE LINE # 34: 834 OUTSIDE
A LINE # 35: 835 OUTSIDE LINE # 36: 836 OUTSIDE
A LINE # 37: 837 OUTSIDE LINE # 38: 838 OUTSIDE
A LINE # 39: 839 OUTSIDE LINE # 40: 840 OUTSIDE
A LINE # 41: 841 OUTSIDE LINE # 42: 842 OUTSIDE
A LINE # 43: 843 OUTSIDE LINE # 44: 844 OUTSIDE
A SYSTEM DIAL PLAN


A DIAL PLAN FOR STATIONS

A STN #: 1 100 OPERATR STN #: 2 300
A STN #: 3 101 STN #: 4 301
A STN #: 5 102 STN #: 6 302
A STN #: 7 103 STN #: 8 303
A STN #: 9 104 OPERATR STN #: 10 304
A STN #: 11 105 STN #: 12 305
A STN #: 13 106 STN #: 14 306
A STN #: 15 107 STN #: 16 307
A STN #: 17 108 STN #: 18 308
A STN #: 19 109 STN #: 20 309
A STN #: 21 110 STN #: 22 310
A STN #: 23 111 STN #: 24 311
A STN #: 25 112 STN #: 26 312
A STN #: 27 113 STN #: 28 313
A STN #: 29 114 STN #: 30 314
A STN #: 31 115 STN #: 32 315
A STN #: 33 116 STN #: 34 117
A STN #: 35 118 STN #: 36 119
A STN #: 37 120 STN #: 38 121
A STN #: 39 122 STN #: 40 123
A STN #: 41 124 STN #: 42 125
A STN #: 43 126 STN #: 44 127
A STN #: 45 128 STN #: 46 129
A STN #: 47 130 STN #: 48 131
A STN #: 49 132 STN #: 50 332
A STN #: 51 133 STN #: 52 333
A STN #: 53 134 STN #: 54 334
A STN #: 55 135 STN #: 56 335
A STN #: 57 136 STN #: 58 336
A STN #: 59 137 STN #: 60 337
A STN #: 61 138 STN #: 62 338
A STN #: 63 139 STN #: 64 339
A STN #: 65 140 OPERATR STN #: 66 340
A STN #: 67 141 STN #: 68 341
A STN #: 69 142 STN #: 70 342
A STN #: 71 143 STN #: 72 343
A STN #: 73 144 STN #: 74 344
A STN #: 75 145 STN #: 76 345
A STN #: 77 146 STN #: 78 346
A STN #: 79 147 STN #: 80 347
A STN #: 81 148 STN #: 82 149
A STN #: 83 150 STN #: 84 151
A STN #: 85 152 STN #: 86 153
A STN #: 87 154 STN #: 88 155
A STN #: 89 156 STN #: 90 157
A STN #: 91 158 STN #: 92 159
A STN #: 93 160 STN #: 94 161
A STN #: 95 162 STN #: 96 163
A STN #: 97 164 STN #: 98 165
A STN #: 99 166 STN #:100 167
A STN #:101 168 STN #:102 169
A STN #:103 170 STN #:104 171
A STN #:105 172 STN #:106 173
A SYSTEM DIAL PLAN


A STN #:107 174 STN #:108 175
A SYSTEM DIAL PLAN


A COMPLETE DIAL PLAN FOR STATIONS AND ADJUNCTS:

A ID #: 1 100 300 ID #: 2 101 301
A ID #: 3 102 302 ID #: 4 103 303
A ID #: 5 104 304 ID #: 6 105 305
A ID #: 7 106 306 ID #: 8 107 307
A ID #: 9 108 308 ID #: 10 109 309
A ID #: 11 110 310 ID #: 12 111 311
A ID #: 13 112 312 ID #: 14 113 313
A ID #: 15 114 314 ID #: 16 115 315
A ID #: 17 116 316 ID #: 18 117 317
A ID #: 19 118 318 ID #: 20 119 319
A ID #: 21 120 320 ID #: 22 121 321
A ID #: 23 122 322 ID #: 24 123 323
A ID #: 25 124 324 ID #: 26 125 325
A ID #: 27 126 326 ID #: 28 127 327
A ID #: 29 128 328 ID #: 30 129 329
A ID #: 31 130 330 ID #: 32 131 331
A ID #: 33 132 332 ID #: 34 133 333
A ID #: 35 134 334 ID #: 36 135 335
A ID #: 37 136 336 ID #: 38 137 337
A ID #: 39 138 338 ID #: 40 139 339
A ID #: 41 140 340 ID #: 42 141 341
A ID #: 43 142 342 ID #: 44 143 343
A ID #: 45 144 344 ID #: 46 145 345
A ID #: 47 146 346 ID #: 48 147 347
A ID #: 49 148 348 ID #: 50 149 349
A ID #: 51 150 350 ID #: 52 151 351
A ID #: 53 152 352 ID #: 54 153 353
A ID #: 55 154 354 ID #: 56 155 355
A ID #: 57 156 356 ID #: 58 157 357
A ID #: 59 158 358 ID #: 60 159 359
A ID #: 61 160 360 ID #: 62 161 361
A ID #: 63 162 362 ID #: 64 163 363
A ID #: 65 164 364 ID #: 66 165 365
A ID #: 67 166 366 ID #: 68 167 367
A ID #: 69 168 368 ID #: 70 169 369
A ID #: 71 170 370 ID #: 72 171 371
A ID #: 73 172 372 ID #: 74 173 373
A ID #: 75 174 374 ID #: 76 175 375
A ID #: 77 176 376 ID #: 78 177 377
A ID #: 79 178 378 ID #: 80 179 379
A ID #: 81 180 380 ID #: 82 181 381
A ID #: 83 182 382 ID #: 84 183 383
A ID #: 85 184 384 ID #: 86 185 385
A ID #: 87 186 386 ID #: 88 187 387
A ID #: 89 188 388 ID #: 90 189 389
A ID #: 91 190 390 ID #: 92 191 391
A ID #: 93 192 392 ID #: 94 193 393
A ID #: 95 194 394 ID #: 96 195 395
A ID #: 97 196 396 ID #: 98 197 397
A ID #: 99 198 398 ID #:100 199 399
A ID #:101 200 400 ID #:102 201 401
A ID #:103 202 402 ID #:104 203 403
A ID #:105 204 404 ID #:106 205 405
A SYSTEM DIAL PLAN


A ID #:107 206 406 ID #:108 207 407
A ID #:109 208 408 ID #:110 209 409
A ID #:111 210 410 ID #:112 211 411
A ID #:113 212 412 ID #:114 213 413
A ID #:115 214 414 ID #:116 215 415
A ID #:117 216 416 ID #:118 217 417
A ID #:119 218 418 ID #:120 219 419
A ID #:121 220 420 ID #:122 221 421
A ID #:123 222 422 ID #:124 223 423
A ID #:125 224 424 ID #:126 225 425
A ID #:127 226 426 ID #:128 227 427
A ID #:129 228 428 ID #:130 229 429
A ID #:131 230 430 ID #:132 231 431
A ID #:133 232 432 ID #:134 233 433
A ID #:135 234 434 ID #:136 235 435
A ID #:137 236 436 ID #:138 237 437
A ID #:139 238 438 ID #:140 239 439
A ID #:141 240 440 ID #:142 241 441
A ID #:143 242 442 ID #:144 243 443
A ID #:145 244 444 ID #:146 245 445
A ID #:147 246 446 ID #:148 247 447
A ID #:149 248 448 ID #:150 249 449
A ID #:151 250 450 ID #:152 251 451
A ID #:153 252 452 ID #:154 253 453
A ID #:155 254 454 ID #:156 255 455
A ID #:157 256 456 ID #:158 257 457
A ID #:159 258 458 ID #:160 259 459
A ID #:161 260 460 ID #:162 261 461
A ID #:163 262 462 ID #:164 263 463
A ID #:165 264 464 ID #:166 265 465
A ID #:167 266 466 ID #:168 267 467
A ID #:169 268 468 ID #:170 269 469
A ID #:171 270 470 ID #:172 271 471
A ID #:173 272 472 ID #:174 273 473
A ID #:175 274 474 ID #:176 275 475
A ID #:177 276 476 ID #:178 277 477
A ID #:179 278 478 ID #:180 279 479
A ID #:181 280 480 ID #:182 281 481
A ID #:183 282 482 ID #:184 283 483
A ID #:185 284 484 ID #:186 285 485
A ID #:187 286 486 ID #:188 287 487
A ID #:189 288 488 ID #:190 289 489
A ID #:191 290 490 ID #:192 291 491
A ID #:193 292 492 ID #:194 293 493
A ID #:195 294 494 ID #:196 295 495
A ID #:197 296 496 ID #:198 297 497
A ID #:199 298 498 ID #:200 299 499
P3F1FIM Tone

Thanks in advance for your wisdom and advice. So good to have someone to discuss this with. If I wind up making a dime on this, I'll donate at least a nickel.

 

[photon33]

I always set the network service to any service for any used entries in dial plan routing, other than that a session of SPM Monitor is probably needed to capture the DTMF that the TELCO is feeding you.....

 

[kwing112000]

You will have to change your extensions numbers to match the incoming DID's. I think you can only have 15 entries where you can delete the incoming digits and replace with ext digits. If i am wrong please correct me. I would try to change 1 extension to match one of the DID's and see if it works.

 

[Victory101]

How do you setup the SPM Monitor to monitor the D-Channel?

 

[merlinman]

Forget about MONITOR, your issues are much more simple than that.

Your extensions are in the range of 100 to 298 or so.

The D-I-D numbers being sent are in the range of 4490 to 4979 or 490 to 979. We are not getting a clear picture here.

You need to know what they are sending, and either MATCH THAT with your Dial Plan, or massage your PRI ROUTING TABLES to make that fit your dial plan.

So, back to basics, what are they sending?

That is, HOW MANY DIGITS?

-AND- WHAT DIGITS?

-AND- How do you want this to work.

MEANING, do you want the DIAL PLAN to match the D-I-D's or do you want to MASSAGE the ROUTING TABLES to send certain numbers to certain extensions?

We have to get on top of those questions before we can move forward.

 

[Victory101]

Thanks in advance for your help. I'm receiving 4 digits at present, the carrier will accommodate me with either 3 or 4. For example, in the first DID, they are sending 4940. I'm presently supporting 12 analog CO lines, and will need to provide for about 16 DIDs for the cut. Eventually I will convert to 4 digit Dial Plan, and make the extensions follow the DID. So presently, I would like to translate the DID's to the existing extensions. I have 2 companies on the system, so most of the DID's will be going to the 2 operator extensions 104 and 140.

Please let me know if I can provide any more info.

 

[merlinman]

Assuming that you are not using any extensions higher than the 100 range, the answer is:

Change your Dial Plan Routing Table ZERO to DELETE 2 and add the number 1.

 

[Victory101]

Thanks for your response. If I understand, Dial Plan Routing Table entry number 13 would ring to extension 142, but it rang to 140, the designated unassigned number extension.

Is this true?

I'm told if there was a change on the module from PRI to T-1, you must default the system and reprogram to get back to functional PRI. If so, can I change the port location of the PRI module, renumber and reprogram?

 

[merlinman]

13 would ring to extension 142, but it rang to 140, the designated unassigned number"

This may indicate you are not getting 4 digits.

"you must default the system and reprogram to get back to functional PRI. If so, can I change the port location of the PRI module, renumber and reprogram?"

I would not do that.

I would leave everything where it is.

 

[vantom1100]

Keep in mind that the T1 providers are either Lying to you or they are stupid, or both. Having worked on the cut-over of hundreds of T1's, I have experienced every manner of incompetence, from T1 providers, that anyone could possibly imagine. No, I'm not bitter!

 

[Victory101]

I just borrowed a PRI test set, and I'll go out tommorow and check the carrier output. I should also be able to send into the Merlin and try the routing table.

Vantom, I feel your pain. I fought with them for a week on the T-1 itself, and it turned out to be low levels. They still won't cop to that.

Thanks everyone for the valuable input. Cut day is the 20th!