The Operator Mailbox (x200-personal) seems to have always been a hit/miss issue. Some systems it works fine other systems it works with a "Do Not Disturb" button. I would like to know how to translate it so calls to x200 internally are covered by the same mailbox that works with the auto attendant mailboxes and system administrator mailbox.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Legend/Magix Operator Mailbox
- Thread starter WikiTech
- Start date
Telecomboy
Programmer
In voicemail, change the call answer service operator to x200 (default is 768 which transfers the call to the first port on the system which is probably x200, but it will never cover to voicemail). Under auto-attendants, make sure your dial 0 timeout is also set to x200 versus the "call answer service operator". That should solve your issue.
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question