Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Legend Losing Programming / Battery Replacement

Status
Not open for further replies.

upstateny

Vendor
Aug 11, 2001
163
US
Customer has a Legend that is losing all programming every time they lose power - i assume it is a bad battery but have not dealt with this issue in the Legend - any thoughts??
 
What release is this?

If it's less than a 3, I'd replace the processor.

I'd probably replace the processor if it is 3 or more, but the difference is, 3 and later saves the translations on the flash card, thus making the issue less than FATAL.

AFTER I MAKE SURE THE BATTERY STRAPS ARE IN PLACE !

We used to take them off when we did training, so we could do a new start just by powering down.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top