Legend 7.0 dialing to Germany

[brannan]

Recently, Germany changed cell phone numbers to 11 digits. When calling international from Legend 7.0 the customer can reach 10 digit numbers in Germany fine, but when dialing 11 digits, the network provider does not receive the last digit dialed from the Legend. I do not see any problems or settings in ars or pri setup to fix this. Solution?

 

[merlinman]

I suggest you print and post your PRI info.

We may see something there.

http://home.comcast.net/~merlinman

 

[CarGoSki]

011 should allow you to enter as many digits as you need. If you know how to enter maintenance mode then enable smdr or prig to see the number sent to the provider. Since the mode has a protected password I cannot provide that information.

 

[brannan]

PRI INFORMATION



Slot 6 Switch: 5ESS

System: By line

BchnlGrp #: Slot: TestTelNum: NtwkServ: Incoming Routing:
1 6 CallbyCall By Dial Plan

Channel ID: 16 15 14 13 12 11 10 9 8 7
6 5 4 3 2 1

Line PhoneNumber NumberToSend
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828

Network Selection Table

Entry Number: 0 1 2 3
Pattern to Match: 101**** 10***

Special Service Table

Entry Number: 0 1 2 3 4 5 6 7
Pattern to Match: 011 010 01 00 0 1
Operator: none none none none none none none none
Type of Number: I I I N N N N N
Digits to Delete: 0 0 0 0 0 0 0 0

Call-By-Call Service Table

Entry Number: 0 1 2 3 4
Pattern 0: 0
Pattern 1: 1
Pattern 2: 2
Pattern 3: 3
Pattern 4: 4
Pattern 5: 5
Pattern 6: 6
Pattern 7: 7
Pattern 8: 8
Pattern 9: 9
PRI INFORMATION


Call Type: BOTH BOTH BOTH BOTH BOTH
NtwkServ: No Service
DeleteDigits: 0 0 0 0 0

Entry Number: 5 6 7 8 9
Call Type: BOTH BOTH BOTH BOTH BOTH
NtwkServ:
DeleteDigits: 0 0 0 0 0

Dial Plan Routing Table

Entry Number: 0 1 2 3
NtwkServ: Any service Any service Any service
Expected Digits: 3 3 3 0
Pattern to Match: 904 716
Digits to Delete: 3 3 0 0
Digits to Add: 190 191

Entry Number: 4 5 6 7
NtwkServ:
Expected Digits: 0 0 0 0
Pattern to Match:
Digits to Delete: 0 0 0 0
Digits to Add:

Entry Number: 8 9 10 11
NtwkServ:
Expected Digits: 0 0 0 0
Pattern to Match:
Digits to Delete: 0 0 0 0
Digits to Add:

Entry Number: 12 13 14 15
NtwkServ:
Expected Digits: 0 0 0 0
Pattern to Match:
Digits to Delete: 0 0 0 0
Digits to Add:

 

[brannan]

Problem solved.
Network services/special services/pattern 011/digits to delete. I deleted (3) digits and this solved the problem.
Type of number remained (I).