Least-cost routing to mobile phones

[schilperoort]

Hello

In CM 4.2 I would like to setup the following least-cost routing for 25 mobile phones who are in one group.

Calls from fixed IP-Phones to these mobile numbers should be route via a GSM-box, all other mobile numbers should be route to the regular PSTN network via a voice gateway.

My question is how can I create a pool of mobile numbers which can be dialed via de GSM-box, or do I have to define each number seperately in the routing pattern?

Thanks for support

Best regards Ronald

 

[mtashiro]

You will probably have to create spearate Route Patterns unless they are sequential numbers which isn't likely.

 

[schilperoort]

Thanks for your reply.

That's what I need to know. Some number are in a sequential range, but most of them not.

Now I know what I have to do.

Thanks