LDK-100 Failed Upgrade - Help!

[BigSteve1968]

Hello all, tried to upgrade our LDK-100, software was downloaded OK but the prompt box that comes up at the end telling you about reset was corrupt.

Waited 30 minutes to see if the unit would come back up but it didn't. The 8 LED's are 'running' up and down continuosly in a strange pattern - 1 dot goes up and down, then 2 dots, then 3,etc until all 8 dots then it counts backward to 1 dot going up and down!

Cannot connect with any version of PC Admin. Is there a way to retrieve the situation?

It's an MPBE with ASMU1E.

Thanks.

 

[doktor]

It is OK to use s/w 2.2 up to 3.9 with MPBE with ASMU1E.
But very bad if the upgrade fails.
Your local LG-Nortel dealer should have a "MPBE like board" where you can copy from one ASMU1E (that work) to the "defective one". This is the only way to rescue your ASMU1E.

///doktor