Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

LD calls fail from MS LYNC to CS1000E

Status
Not open for further replies.

SWTLayne

IS-IT--Management
Nov 24, 2003
2
US
We have a CS1000M system that we are retiring and are moving resources to three CS1000E systems. Two weeks ago we moved the long distance trunks from the M to one of the E systems and we have discovered that LD calls from LYNC fail. I am getting a SIP/2.0 481 Call Leg/ Transaction Does Not Exist. I see the INVITE, TRYING,200OK,ACK,reINVITE,BYE,TRYING and this Call Leg error. The best I can tell, this error happens because of the BYE message but the call did not exist. LYNC users were able to make LD calls before we moved the trunks. Programming is almost the same except I am now using PRI Gateway units. Any ideas?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top