ld 60? option 51c 1

[altolabado]

I did a lD 60 check for clean PRI on 51c does this
look clean to you?

# LD 60 identifier.
.lcnt


PRI TRK LOOP 2
TRSH CNT:
BPV -000
SLIPD -000
SLIPR -000
CRC -000
LOSFA -000
OS_BPV -000
OS_LOSFA-000
OS_YEL -000


PRI TRK LOOP 3
TRSH CNT:
BPV -000
SLIPD -000
SLIPR -000
CRC -000
LOSFA -000
OS_BPV -000
OS_LOSFA-000
OS_YEL -000


DTI TRK LOOP 6
TRSH CNT:
BPV -000
SLIPD -000
SLIPR -000
LOSFA -000
OS_BPV -000
OS_LOSFA-000
OS_YEL -000


PRI TRK LOOP 7
TRSH CNT:
BPV -000
SLIPD -000
SLIPR -000
CRC -000
LOSFA -000
OS_BPV -000
OS_LOSFA-000
OS_YEL -000


.

 

[johnpoole]

yes the count goes up with errors

john poole
bellsouth business
columbia,sc

 

[roupe]

All counters are reset to 0 after midnight routine runs. If you see pegs on the counters, they have occurred since the last Midnight. In LD 60 RCNT resets them. If you check later LCNT and see pegs, SSCK 0 to stat system clock to make sure clock is tracking on primary clock source. If so and pegs still occur, contact network provider.