Hey, can anybody tell me if somewhere in LD 2 I can set up measurement recording of PRI channel utilization? I need to see how much channel usage our T1's are using throughout a "normal day." The Travon Martin case is coming up and I need to analyze peak usage in case we need to implement greater capacity. Thanks for all responses.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
LD 2 Traffic reports
- Thread starter Herbasaur
- Start date
LD 2 can give you traffic by "Route", including calls and minutes of usage.
You really have to want the data bad if you don't have a system to interpret the traffic data.
Open the books and look at these commands in LD 2 - Books here: [URL unfurl="true"]http://www.ghtrout.com/files/Traffic_CS1000_Traffic_Book.zip[/url]
TOPC 0 (Tell Options)
TSHC 0 (Tell schedule)
SOPC 0 (Set Options)
SSHC 0 (Set Schedule)
INVC 0 (Invoke last report to printer)
Use this to interpret it [URL unfurl="true"]http://www.ghtrout.com/files/Traffic_Calculator_for_TFC001-2-3-4.zip[/url]
~~
Gene at www.GHTROUT.com
You really have to want the data bad if you don't have a system to interpret the traffic data.
Open the books and look at these commands in LD 2 - Books here: [URL unfurl="true"]http://www.ghtrout.com/files/Traffic_CS1000_Traffic_Book.zip[/url]
TOPC 0 (Tell Options)
TSHC 0 (Tell schedule)
SOPC 0 (Set Options)
SSHC 0 (Set Schedule)
INVC 0 (Invoke last report to printer)
Use this to interpret it [URL unfurl="true"]http://www.ghtrout.com/files/Traffic_Calculator_for_TFC001-2-3-4.zip[/url]
~~
Gene at www.GHTROUT.com
- Status
Similar threads
