Hi,
I have IPO 403 running 2.1(15) connected with Avaya S8300/G700 CM R1.3 by IP trunk. It is working fine (including FAX over IP
) except one thing... when it is used thought Least Cost Route. LCR is configured to use IP trunk for communication from IPO side to CM (main route), and alternative route is administrated BRI trunk to PSTN. In case that IP trunk is down (e.g. unplugging Ethernet connection from CM) calls should be routed over alternate rote which is BRI line, but it is not happening. It seams like IPO doesn’t realize that this line is out of service and alternative should be used. Mentioned problem doesn’t appear when e.g. two BRI lines (main and alternative) are used. When main BRI is unplugged, alternative BRI is used.
Can somebody give some hint?
Cheers!!!
I have IPO 403 running 2.1(15) connected with Avaya S8300/G700 CM R1.3 by IP trunk. It is working fine (including FAX over IP
) except one thing... when it is used thought Least Cost Route. LCR is configured to use IP trunk for communication from IPO side to CM (main route), and alternative route is administrated BRI trunk to PSTN. In case that IP trunk is down (e.g. unplugging Ethernet connection from CM) calls should be routed over alternate rote which is BRI line, but it is not happening. It seams like IPO doesn’t realize that this line is out of service and alternative should be used. Mentioned problem doesn’t appear when e.g. two BRI lines (main and alternative) are used. When main BRI is unplugged, alternative BRI is used.Can somebody give some hint?
Cheers!!!
