LCR PGMING ON NEAX DM/2000 - ADDING IN DIGITS

[steph4pbx]

Does anyone know if there is a command in the NEAX DM/2000 IVS/IPS to add in digits based on what first digit you dial. I.e. if you program an LCR route, so that when you dial the first digit as a 3 or 2 for example (which are stations on other PBX connected to the NEC) that it then knows to add a specific access code in front of it such as 84 or 82. I have a Samsung connected to a DM and then there are two other Samsungs which connect to the Samsung that is talking to the NEAX DM. However these distant systems require you to dial 83 or 84 prior to the 4-digit extensions in order to make the station to station call between the Samsungs. The Main Samsung has a command which does this very function - i.e. when you dial a 2 or 3 as the first digit of an extension, it adds in the 83 or 84 in front of the 4-digit extension to make the call. Hope I am not being too wordy - just trying to give as many specifics as possible.

If anyone has any insight on this - please let me know.

Thanks.

 

[OzzieGeorge]

Steph

Cmd 8A5000 on the IPS and IVS2 or cmd 8A500 on the IVS second data 100 takes you to a digit addition pattern which is then programmed in Cmd 8A9000 or 8A900 respectively

 

[steph4pbx]

Thanks very much and we're doing this now. Looks like all will work out!

 

[hwestman]

Hi,

check CMD 8A5000>100 and 8A9000

 

[hwestman]

sorry, you aldready got your answere..... ;-)