LCR analog + VoIP to Definity 1

[slovic]

On a site I have IPO 403 1.4(22) installed, with 2 outgoing analog lines and VoIP trunks to Definity with 6 channels. I tried to configure Least Cost Route to use VoIP trunks to Definity as alternative route when analog lines are in use (busy), to perform calls through Definity and its outgoing lines (for that purpose I have to put 0 in front of numbers for Definity's ARS analisys).
Any ideas?

 

[IPGuru]

in the lcr alternate route try
short code ?
telephone number 0.
line group ID (Voip group)
feature Dial

 

[MrIPO]

Have a primary LCR entry for the AGLOG Lines to the Definity. Make sure there are only the 2 AGLOG lines in the Line Group

Then create as IP Guru stated a Second fallback route to the Line group (of the VoIP Line) and create a 2 second time out on the primary route.

Are you able to dial the definity via the VoIP line OK. If not the LCR will not work.

Create a Systen short code to test the connection to the Definity