Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Launch Procomm and connect
- Thread starter Arugg
- Start date
You can have this scheduler launch this command line to start Procomm and your script:
pw5.exe CONNECT DATA "entryname" script.wax
where "entryname" is the Connection Directory entry name exactly as it appears and script.wax is the name of the script that will log in to the PBX, send commands, etc. You will need to include the path to pw5.exe (located in the Programs directory under your Procomm install) unless you have added this directory to the path.
aspect@aspectscripting.com
pw5.exe CONNECT DATA "entryname" script.wax
where "entryname" is the Connection Directory entry name exactly as it appears and script.wax is the name of the script that will log in to the PBX, send commands, etc. You will need to include the path to pw5.exe (located in the Programs directory under your Procomm install) unless you have added this directory to the path.
aspect@aspectscripting.com
- Thread starter
- #3
- Status
