Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Last Pickup Key

Status
Not open for further replies.

Seajumper

Programmer
Oct 11, 2005
60
US
I have lpk programmed to lpk 5, but when the phone rings I still have to hit the line button to answer the call. What am I missing?
 
check your CLS setting on the set. there are 3 choices, IRA, NIA and OLA. make sure you're using the right one.
 
LPK is Line Preference Key not last pickup Key


LPK Line Preference Key limit (last key scanned for
Automatic Line Preference)
Isel-4
(0)-5 For M2006
(0)-7 For M2008
(0)-27 For M2616, varies with number of add-on modules
(Option 11C)
(0)-59 For M2616, varies with number of add-on modules
(0)-69 For SL-1, varies with number of key/lamp strips
Prompted when CLS = IRA, NIA or OLA.


(IRD) Incoming Ringing Line Preference Denied lsel-4
IRA Incoming Ringing Line Preference Allowed

(NID) Non-ringing Incoming Line Preference Denied lsel-4
NIA Non-ringing Incoming Line Preference Allowed

(OLD) Outgoing Line Preference Denied lsel-4
OLA Outgoing Line Preference Allowed




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top