Laser check printing from DOS VP Version 9.0??

[goofpod]

Anybody still running DOS VisionPoint 9.0 Build 905? We are trying to convert from Dotmatrix to Laser printing out of A/P and are experiencing formatting issues. We're trying to format a 'stub/check/stub' page. Seems reprints of checks come out ok (most of the time), but originals ALWAYS print to 2 pages in 10 pci instead of the default 12 pci that VisionPoint, itself, supposedly requires. The printer (HP 4100) is set to 12 pci. After many 'controlled' experiments, we thought we had it nailed down to only reprints working, but even they seem to occassionally 'spill over' to a 2nd page. Is there a glitch in the code? Is anybody out there? What is the meaning of life, anyway???

Thanks!

Ralph Haney MCSE

http://www.avalonnaturalproducts.com

 

[SBTBILL]

You might check some of the other threads I've posted on about version 9 and before problems. Basic advise upgrade to 10 it is written in VFP while 9 and before are written in FPD2.6 or FPW2.6 which is not really XP compatible. It costs about $400 per module. I can arrainge the upgrade.

Bill Couture
HTTP:\\

http://WWW.SBTBILL.COM