Lan1 Lan2 on different subnets?

[macr0w]

Hey guys,
What is the proper way to setup IP Routes on a server edition with a primary and a secondary server with lan1 on one subnet and lan2 on a different subnet.

For instance primary server is:
lan1 = 10.1.4.70
lan2 = 10.1.1.70
Secondary server is:
lan1 = 10.1.4.71
lan2 = 10.1.1.71
The gateway is:
lan1 = 10.1.4.100
lan2 = 10.1.1.100

Creating ip routes with this info caused me a bunch of problems.

What is the correct way to it?

 

[tlpeter]

What do you want to do?
You can create any ip route but you need to know what you want to reach.

BAZINGA!

I'm not insane, my mother had me tested!