SenorAvayaGuy
Technical User
Hello fellow users,
I have a G600 V9 Definity i am currently working on to try to get remote access to or at least LAN access
I have configured the following
IP interface
Enable Net
Eth Pt Type Slot Code Sfx Node Name Subnet Mask Gateway Address Rgn
y C-LAN 01A03 TN799 D SAT 255.255.248.0 10 .2xx.24 .xx 1
IP services
Service Enabled Local Local Remote Remote
Type Node Port Node Port
SAT y SAT 5111 any 0
Data-Module
Data Extension: 1000 Name: SAT Remote Access
Type: ethernet
Port: 01A0317
Link: 1
Node-names IP
IP NODE NAMES
Name IP Address Name IP Address
SAT 10 .2xx.24 .xx . . .
default 0 .0 .0 .0 . . .
The LAN being provided is DHCP in a customers network.
In the switch (emulation) i am able to ping the IP address but can not ping from laptop on same network.
Any ideas ?
Please advise.
I have a G600 V9 Definity i am currently working on to try to get remote access to or at least LAN access
I have configured the following
IP interface
Enable Net
Eth Pt Type Slot Code Sfx Node Name Subnet Mask Gateway Address Rgn
y C-LAN 01A03 TN799 D SAT 255.255.248.0 10 .2xx.24 .xx 1
IP services
Service Enabled Local Local Remote Remote
Type Node Port Node Port
SAT y SAT 5111 any 0
Data-Module
Data Extension: 1000 Name: SAT Remote Access
Type: ethernet
Port: 01A0317
Link: 1
Node-names IP
IP NODE NAMES
Name IP Address Name IP Address
SAT 10 .2xx.24 .xx . . .
default 0 .0 .0 .0 . . .
The LAN being provided is DHCP in a customers network.
In the switch (emulation) i am able to ping the IP address but can not ping from laptop on same network.
Any ideas ?
Please advise.