LAN 1 IP change

[Khosher]

Hi Guys,

Having an issue trying to change the IP of LAN 1. LAN2 was is changed and working fine. However I want to change LAN 1 to put in on another network for management. I have tried through EM and CLI multiple times with reboots, but the IP wont change, it stays at default 10.10.10.1

BCM200 V4.0 fully patched.

Anyone gor any ideas ?

Thanks....

 

[Khosher]

Any takers ?

 

[BiscuitJack]

When you say CLI do you mean that you have used the RS232 port to do the changes?

 

[Khosher]

Yep, no joy though.

 

[DBrewsky]

please describe settings for Lan1 and Lan2.. Also, would recommend using EM to make any IP address changes.


--DB

 

[Khosher]

Lan 1 is at default 10.10.10.1 static
Lan 2 is static also, according to our network and working fine
IP 10.x.x.x
Mask 255.255.0.0
DG 10.x.x.x

I tried to change using EM initally and it wouldn't take and I tried the CLI as an alternative.

If you need anymore info, just let me know