Label printing

[glionel74]

I need help on how to set crystal report 6.0 to ask me on what label number should it start printing.I'm using AVERY 5160 it's 3x10.

 

[MrBillSC]

glionel74,
The only idea I came up with will only work if you print accross then down.
Your labels contain 10 rows. Create a numeric parameter prompting for row to start printing (values 1 to 10).
Create report header sections a through j (10 sections) and expand them to the size of your detail section.
For each report header section, conditionally suppress as follows:
// section RHa:
{?PrintRow} = 1

// section RHb:
{?PrintRow} < 2

etc.

This is not perfect as you must print on the first full row of labels (possibly wasting a couple) and will only work printing accross then down.

Hope this helps,
MrBill