Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

L5500 Robot Speed 1

Status
Not open for further replies.

nunney

Technical User
Jul 25, 2006
12
0
0
GB
Hi I've got a ACS of 2 L5500's that have just come off of Contract to STK/SUN. I'm convinced that the Robotic Arms are running slower (when compared to my other S/390 attached) Does any one know of a way to check this?
 
Nunney

There is a "turbo" performance upgrade for the 9310 which will take the speed up to 450 exchanges per hour. This upgrade is just a number typed into the LMU - no hardware changes are required. This upgrade was never made available for the L5500, which is fixed at 350 exchanges per hour. The reason, one presumes, is that the library doesn't require as many service calls when running slower.

If the 9310's are moving faster than the L5500 then the 9310's are in turbo mode.

regards,

STKman.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top