Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
L3 3750
- Thread starter arvindai
- Start date
- Thread starter
- #3
My concern is possiblity to put one put in routed mode for WAN connectivity and the rest ports in L2 mode. We plan to run BGP with appropriate image. Will there be no problem is we run both the connections on the same switch. Help me with the configuration. thanks
Hi,
Did you ever resolved your HSRP problem.In any case,this will cause no problems.It's just like having a router and switch in the same box.For the conf,you just need to make one of the ports level 3 as "Belushi" said.Then configure BGP as normal.For layer 2 you will have create a VLAN for the host.
Regards
Did you ever resolved your HSRP problem.In any case,this will cause no problems.It's just like having a router and switch in the same box.For the conf,you just need to make one of the ports level 3 as "Belushi" said.Then configure BGP as normal.For layer 2 you will have create a VLAN for the host.
Regards
- Status
Similar threads
