Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

L2L VPN / NAT Issue-HELP?

Status
Not open for further replies.
captnops

captnops

IS-IT--Management
Feb 12, 2003
141
0
0
My IOS router hosts multiple L2L customer VPN Tunnels. Some require inside NAT and others do not. For the one that requires inside NAT, I created a pool and everything works great.

I just added a new customer who also requires inside NAT. Whenever I try to ping the customer host from inside my network, my IP address is NAT'd using the other customer pool and therefore, I am unable to create the tunnel.

Is is only possible to perform inside NAT once?

Thanks
 
Status
Not open for further replies.

Similar threads

Jared R
  • Locked
  • Question
Cisco UC320W Paging Help
Replies
0
Views
117
Jared R
Jared R
quazimotto
  • Locked
  • Question
Cisco ASA_5505 VPN to Juniper_SRX210 VPN IS UP_ No Traffic!!!!!!
Replies
0
Views
37
quazimotto
quazimotto
WinstonCH
  • Locked
  • Helpful tip
What is wrong with the diagram, there are people who will help to fix it? How do i do the configurat
Replies
1
Views
87
BIS
BIS
phonedudeSr
  • Locked
  • Question
Cisco Unity Connection Subscriber issue
Replies
2
Views
57
phonedudeSr
phonedudeSr
bfordz
  • Locked
  • Question
new help on setting up third party VoIP phones through Catalyst 2960x switch
Replies
0
Views
51
bfordz
bfordz

Part and Inventory Search

Sponsor

Back
Top