Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

L180 FSC 3094 Reach

Status
Not open for further replies.
roadbadger

roadbadger

Technical User
Oct 24, 2006
13
GB
I've got an L180 that keeps on coming up with this error. Its had the picker replaced, but after a while this fault comes back. Its got 9840 media in it, is there anything I can do to stop this happening? Is it more than the picker?
 
Sort by date Sort by votes
This problem can be caused by onr of three things:
1. The gripper assy (It is not to say that the replacement on is good)
2. The Flex Cable connecting to the Gripper Assy.Make sure the plugs are seated correctly.
3. The MPC card (Controller board).
From experience I would go for the Hand assy and the cables first.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

shaun150uk
  • Locked
  • Question
Storagetek L180 L700 Firmware 1
Replies
9
Views
144
TechyG
TechyG
ryancadiz
  • Locked
  • Question
L20 FSC codes
Replies
3
Views
81
MichaelBille
MichaelBille
lunatir
  • Locked
  • Question
How do you disable AutoClean on a L180 Library
Replies
5
Views
61
TechyG
TechyG
jsauls
  • Locked
  • Question
L180 Target error with two new(refurb) LTO2 drives
Replies
6
Views
110
jsauls
jsauls
opticomit
  • Locked
  • Question
How to test a L180
Replies
8
Views
119
STKman
STKman

Part and Inventory Search

Sponsor

Back
Top