KXTDA caller id on a SLT

[rivet]

hi all just a small question

anyone know if it is posable to get id on a slt extention with a display.. from an extention on a TDA200 i dont think so myself but thought i would ask the question dect not an option as cus will have 150+ slt's when complete

 

[cwc3]

i think only 8 phones will get it on 200 with a 5168
installed what a pity eh a mitel el with class cards will do it i think !

 

[rivet]

a pitty is right you wouldent thinka small thing like that would be beyond the scope of a phone sys

 

[cwc3]

hey quote a mitel ICP

 

[rivet]

yep will have a look at it

 

[shardian]

As far as the guys at pana told me earlier today, you can put 8 EXT-CID cards into a TDA200. Each cards provides CID for 8 extensions...thus 8x8 = 64 SLC extensions that can recieve caller id...Still not all the way there, but somes better than none...

 

[rivet]

yes but that would only leave 2 slots or enough room for 16 slt phones (i think were playing snakes & ladders

 

[cwc3]

hey rivet is this for a hotel or an office application?

 

[rivet]

its for a student housing project will be joining 2 tda systems will have 200 slt phons on when complete cus wants to use as a form of contact between rooms...

 

[shardian]

If you were really bored and couldn't get another system to do what you needed, you could network 4 tda200 boxes using qsig over a PRI. Dodgey solution I know, but it could work.....chain them along and use the tie tables to route the calls....

 

[rivet]

i was looking at the manual it says that ver 2 would have a interconnect card or a network card for this purpose will have to talk to panasonic in the morning