KX-TDA15 Maintenance console 1

[Wanet Telecoms]

Hi guys,
Which version of the Panasonic Maintenance Console supports KX-TDA15?

 

[obtsystems]

The latest rev 7 panasonic multi pbx tool will support them all

 

[Wanet Telecoms]

I have version PBX Unified 7.3.1.3.

But it supports the following below.KX-TDA15 is not in the list

TDA30PCMC
TDA30PCMC V1.0
TDA30PCMC V1.1
TDA30PCMC V2.0
TDA30PCMC V3.0
TDA30PCMC V4.0
TDA30PCMC V5.0

TDA100D PCMC
TDA100D V1.1

TDA100/200 PCMC
TDA100/200 V1.0
TDA100/200 V1.1
TDA100/200 V2.0
TDA100/200 V3.0
TDA100/200 V3.2
TDA100/200 V5.0

TDA600 PCMC
TDA600 V2.0
TDA600 V3.1
TDA600 V5.0






TDE100/200 PCMC
TDE100/200 V1.0
TDE100/200 V2.0
TDE100/200 V3.0
TDE100/200 V4.1
TDE100/200 V4.2
TDE100/200 V5.0

TDE600 PCMC
TDE600 V2.0
TDE600 V3.0
TDE600 V4.1
TDE600 V4.2
TDE600 V5.0

NCP500/1000 PCMC
NCP500/1000 V1.0
NCP500/1000 V2.0
NCP500/1000 V4.1
NCP500/1000 V4.2
NCP500/1000 V5.0

MULTISITE PCMC
MSPM V7.2
IPTMC
VOIP TEST TOOL
PBX WEB MANAGER

 

[obtsystems]

I just saw that now. I just connected to a kxtda 15 now and it work. It shows kxtda 30 but on Type on bottom bar shows kxtda 15. It is the same firmware as the 30 anyway

 

[Wanet Telecoms]

I seem not to see it.
In the PBX Model option list all i see is those in the list above.

I don't see anything like Type in my interface

 

[obtsystems]

it is not on the list but connects to tda 15, when you use the drop down ment to select system it has 15/30 on the list, it does work as I have tested it today

 

[Wanet Telecoms]

What version of the Maintenance console are you using?

Am grateful for that piece of info.

Thanks.

 

[obtsystems]

I have the same one as you 7:3:1:3

 

[Wanet Telecoms]

Example i have 7.2 US and 7.2 other.

Same versions for different regions

7.2 US (USA) Supports KX-TDA50

7.2 Other does not support KX-TDA50 yet same version

I will check it out 2moro.

 

[cwc3]

looks like Canadian version

http://www.thetelephonemanonline.com