Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

KX-TD816 - Station Busy and Programming Lock

Status
Not open for further replies.

slatecom

Technical User
May 9, 2011
23
US
Is it possible to lock programming on a phone so that for example someone cannot program direct CO line buttons into their phone or change the BLF keys, like I could with the Norstar systems?

Also, it seems that when a station is in use the all call page (33*) does not work - it says "busy". Can I program the stations to 1) allow a page to be made while a station is use, and 2) automatically hang up an intercom call when the other party disconnects. I find that people sometimes forget to hang up their extension and leave the whole system "hung up". I could only find a reference to outside lines in the program manual, but not intercom calls.

The phones in use are KX-T7433 models.

Thanks!
 
Not on the Td system wont eletronic re-hook or block key programming of keys.

no panasonic systems will allow paging to busy extension
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top