Konica copier set up as printer

[tmgprinters]

I am new to this forum and have very little experience with unix sco 5.05. I would like to know if anyone out there has any experience in setting up a copier as a printer to their unix. The printer has an ip address and is using a pcl driver similiar to the HP printers. We are using century tiny terminal for the setting up procedure.

 

[mrregan]

If your konica has a pcl driver, you should be able to set the printer up a a standard or generic hp printer. You cant hurt anything by trying it out. You may not be able to use some advanced functions like duplex or stapling.

 

[PHV]

You can do remote printing to the Konica's LRP/LPD server.
The remote printer (rp in /etc/printcap) must be PORT1
They don't support SCO extensions.
Sample entry in /etc/printcap:
konica: :lp=:rm=konica:rp=PORT1:sd=/usr/spool/lpd/konica:mx#0: